TransGrind

After some floors are ground, sometimes they will have obvious wave patterns when viewed from the side light. These wave patterns are like ripple marks after the wind blows over the water surface, forming some height differences. It not only means that there is a problem with the flatness of the floor, but also has a great influence on the decorative effect of the floor. The height difference of the seams    The difference in height of the seam is the cause of wave pattern after the partial floor grinding. When paving, the joints of the two plates are not aligned, and there is a difference in height. For the alignment of the other joints, the entire plate will be in a warped state, with one side high and the other low. After grinding in this way, local wave patterns will be formed.    The paving process is unreasonable When a large area, obvious wave pattern appears in an area, it is generally caused by the overall paving process. When paving a large area, workers sometimes use the...

Terrazzo is used to make floors or countertops. It is low in price and relatively clean, so it has been loved by many consumers. Although the floor of terrazzo is more clean, regular polishing is an indispensable process, which can make the terrazzo we use look cleaner and improve the surface finish of the terrazzo. If the floor is uneven, you can first use a refurbished grinding machine with  diamond grinding discs  or grinding heads for grinding. After the surface smoothing, use 50#, 100#, 200# grit  wet floor polishing pads  with water in turn. (If the floor is flat, you can directly polish it with diamond polishing pads.) After the floor is sanded, you can use a water suction machine to suck up the water on the surface of terrazzo floor. After the floor is dry, sprinkle cement curing agent on the floor and keep the floor moist for at least 4 hours. After the cement curing agent dries (the longer the drying time, the better.) Then turn to the fine grinding of the ...