TransGrind

1. Cement floor polishing: Cement floor polishing is also called cement mirror floor and concrete sealing and curing agent floor. The principle is to grind the cement floor to a certain extent, and then spray the concrete sealing and curing agent to block the ground capillary holes and increase the ground strength at the same time, and prevent dust and sand on the ground. Finally, a further polishing mirror treatment is performed to turn the original cheap cement floor into a marble-like glossy floor. 2. This cement floor polishing and cement mirror floor are suitable for workshops, factories, offices, underground parking rooms, schools, airports, supermarkets, shopping malls, hypermarkets, clubs, exhibition halls and other places. This product is dust-proof and clean for new and old cement floors. Compared with other floors, it is the most practical and longest-lasting in the floor industry today! 3. Base surface treatment: Use a refurbisher to remove the loose surface layer, and th...

Concentration is a unique indicator of abrasives tools, which refers to the quality of abrasives tools contained in each cubic centimeter of the working layer of super hard abrasive. The international regulation unit volume contains 0.88G super hard abrasive, and its concentration is 100%. When the content increases or decreases by 0.22G, its concentration increases or decreases by 25% accordingly. Concentration is one of the important characteristics of abrasive tools, which has a significant impact on the grinding efficiency of the abrasive and the processing cost of the process. If the concentration is too high, many abrasives are easy to fall off prematurely, resulting in waste of abrasives; if the concentration is too low, the grinding efficiency decreases and cannot meet the processing requirements. TransGrind is a professional manufacturer of diamond tools for concrete or stone floor grinding and polishing, we have supplied many different kinds of diamond tools for many custo...

1. First of all, the construction retest should be carried out. The staff need to conduct a secondary inspection of the construction environment and reinforce the control pile. 2. Raw materials need to be prepared. Cement, stones and sand are essential. It is recommended to purchase them directly from the local building materials market and then transport them back by truck, which can save a lot of trouble. 3. It is necessary to adjust the concrete mix proportion, which should be carried out in strict accordance with the requirements. The proportion of each material should be carefully considered. After obtaining the approval of the chief engineer, trial mixing should be carried out. 4. Sampling inspection is required, and two groups of test pieces are made respectively for testing to ensure that there is no problem with the compressive capacity of concrete. 5. For concrete pouring, the first thing to do is to prepare the base course. First, clean up the dust and impurities on the gr...