Construction Steps Of Concrete Floor

1. First of all, the construction retest should be carried out. The staff need to conduct a secondary inspection of the construction environment and reinforce the control pile.

2. Raw materials need to be prepared. Cement, stones and sand are essential. It is recommended to purchase them directly from the local building materials market and then transport them back by truck, which can save a lot of trouble.


3. It is necessary to adjust the concrete mix proportion, which should be carried out in strict accordance with the requirements. The proportion of each material should be carefully considered. After obtaining the approval of the chief engineer, trial mixing should be carried out.

4. Sampling inspection is required, and two groups of test pieces are made respectively for testing to ensure that there is no problem with the compressive capacity of concrete.

5. For concrete pouring, the first thing to do is to prepare the base course. First, clean up the dust and impurities on the ground, and then take drainage measures. Every step is very important. Secondly, the construction personnel should prepare the construction machine. Before pouring concrete, they must apply a layer of isolating agent to the formwork to be used, so as to prevent the concrete from sticking to the formwork and it is not easy to demould in the later stage. Finally, it is necessary to pave the concrete evenly, and also use professional tools to flatten the ground, so as not to appear uneven phenomenon.


TransGrind is a professional manufacturer of diamond tools for concrete or stone floor grinding and polishing, we have supplied many different kinds of diamond tools for many customers, such as Scanmaskin tools, Lavina tools, Klindex tools, Husqvarna tools, HTC tools etc. And we got many good feedbacks from our customers about our premium quality. Welcome to consult for our products by clicking the pictures to get into our official web if you are interested.


Comments

Post a Comment

Popular posts from this blog

How to renovate the old cement floor

Image
  How to renovate the old cement floor: 1. Use a professional floor grinder , install the grinding disc , and grind the ground . Remove all the sand from the surface to reveal smooth and firm aggregates. 2. With the sealing curing agent, sprinkle it on the ground, let it fully absorb until it is saturated, which can increase the strength of the cement floor. 3. If the cracking of the cement floor is serious, first roughen the floor, and then rinse the floor with a water gun. 1. Construction joints shall not be left in the laying of the cement concrete surface. When the construction gap exceeds the allowable time, the joints should be treated. If the concrete floor is seriously sanded and ash, the water grinding machine should be installed with a diamond grinding block first. The purpose is to smooth the ground, remove the glue, paint, plain cement slurry and other attachments on the ground, and then assemble the diamond grinding block with a water grinder to grind the ground to
Read more

Grinding Features

Image
Grinding is a method of cutting a workpiece with a grinding wheel as a cutting tool on a grinding machine. The features of this method are: (1) Since the abrasive grains of the grinding wheel have high hardness and heat resistance, grinding can process materials with high hardness, such as hardened steel and cemented carbide. (2) The characteristics of the grinding wheel and the grinding machine determine that the grinding process system can perform uniform micro-cutting, generally ap=0.001 ～ 0.005mm; the grinding speed is very high, generally up to v=30 ～ 50m/s; the grinding machine has good rigidity; using hydraulic transmission, so grinding can economically obtain high machining accuracy (IT6 ~ IT5) and small surface roughness (Ra = 0.8 ~ 0.2μm). Grinding is one of the main methods of finishing parts. TransGrindTools manufacture wide range kinds of diamond grinding tools which can make your grinding work easier and more effective. ​​ (3) The temperature of the grinding zone
Read more

The Origin and Evolution Process of Concrete Floor

Image
Concrete floor  is a kind of integral ground that uses cement and stone particles as the main material. In the course of China 's ground development, it has successively experienced such forms as   terrazzo floor , fair-faced concrete floor ,   and colored wear-resistant floor . Still fashionable terrazzo floor Terrazzo has the strength, wear resistance and durability of natural stone, and it is smooth, easy to clean, and good integrity. As the indoor floor of a large number of public buildings, it is practical and beautiful. The new type of terrazzo has new developments in color and pattern. The decorative effect can meet the modern aesthetic needs, and it can also meet the requirements of environmental protection. It is safe and non-toxic, does not release harmful substances such as benzene, formaldehyde, and has no radioactivity. In addition, compared with building materials with similar effects, decoration investment can be saved by 2/3. Many universities and hospitals use terr
Read more